Diagnostics
RM Web L3E
Release
6.0
07/2010
9.9
Alarms (Traps)
261
9.9 Alarms (Traps)
This dialog allows you to determine which events trigger an alarm (trap) and
where these alarms should be sent.
Select "Create entry“.
In the "Address“ column, enter the IP address of the management station
to which the traps should be sent.
In the "Active“ column, you mark the entries which should be taken into
account when traps are sent.
In the "Selection“ frame, select the trap categories from which you want
to send traps.
To Next Page
Loading...
Need help?
General
