Switching
RM Web L3E
Release
6.0
07/2010
4.5
VLAN
113
4.5.3 VLAN Static
With this dialog you can:
X Create VLANs
X Assign names to VLANs
X Assign ports to VLANs and configure them
X Delete VLANs
Parameter Meaning Possible Values Default Setting
VLAN ID Displays the ID of up to 256
VLANs that are simultaneously
possible.
Name Enter the name of your choice
for this VLAN.
Maximum 32 characters VLAN 1: default
Status Displays the VLAN status. active: Entry is
activated
notInService: Entry is
deactivated
active
Ports x.x Select the membership of the
ports to the VLANs.
-: currently not a
member (GVRP
allowed).
T: Member of the VLAN;
send data packets with
tag (tagged).
U: Member of the VLAN;
send data packets
without tag (untagged).
F: Membership
forbidden, so no entry
possible via GVRP
either.
VLAN 1: U,
new VLANs: -
Table 43: VLAN Static dialog
To Next Page
Loading...
Need help?
General
