Routing
138
6.2
Configuring Router Interfaces
RM Web
Release
6.0
07/2010
6.2.2 Configuring secondary addresses
When you want to use the multinetting function, this dialog enables you to
assign secondary IP addresses to a router interface.
Use the left mouse-button to select a row that contains the port ID in the
first column. Right-click on the selected row and select “Add IP address”
to add a secondary IP address/netmask to the router interface.
Note: You have the option to configure up to 31 secondary IP addresses
per router interface and a total of up to 1,024 secondary IP addresses
per router.
To delete or edit an existing secondary address, select the appropriate
row, right-click on this row, and select “Edit” or “Delete”.
Note: The prerequisite for deletion is that routing has been switched on
for this router interface in the “Router Interfaces” dialog.
To Next Page
Loading...
