Switching
RM Web L3E
Release
6.0
07/2010
4.4
Multicasts
105
Note: If the device is incorporated into a HIPER-Ring, you can use the
following settings to quickly reconfigure the network for data packets with
registered Multicast destination addresses after the ring is switched:
X Switch on the IGMP Snooping on the ring ports and globally, and
X activate “IGMP Forward All” per port on the ring ports.
4.4.2 GMRP (GARP Multicast Registration
Protocol)
With this dialog you can:
X activate/deactivate the GMRP function globally,
X configure the GMRP for each Port.
Figure 28: Multicasts dialog
To Next Page
Loading...
Need help?
General
