Switching
90
4.1
Switching Global
RM Web
Release
6.0
07/2010
4.1 Switching Global
Variable Meaning Possible Values
MAC address
(read only)
Display the MAC address of the device
Aging Time (s) Enter the Aging Time in seconds for
dynamic MAC address entries.
In connection with the router redundancy,
select a time ≥ 30 s.
10-630 30
Flow control Activate/deactivate the flow control
Note: When you are using a redundancy
function, you deactivate the flow control
on the participating ports. Default setting:
flow control deactivated globally and
activated on all ports.
If the flow control and the redundancy
function are active at the same time, there
is a risk of the redundancy failing.
On, Off Off
Learning
addresses
Activate/deactivate the learning of MAC
source addresses.
Note: If routing is active, the device
prevents the address learning from being
switched off.
When you activate routing, the device
automatically activates the address
learning.
On, Off On
Frame size Set the maximum packet size (frame size)
in bytes.
1522, 1552 1522
Activate
Address
Relearn
Detection
Enable/disable whether the device
detects whether it has repeatedly learned
the same MAC source addresses at
different ports. This process very probably
indicates a loop situation in the network.
If the device detects this process, it
creates an entry in the log file and sends
an alarm (trap).
On, Off Off
Table 30: Switching:Global dialog
To Next Page
Loading...
Need help?
General
