Time
RM Web L3E
Release
6.0
07/2010
3.1
SNTP configuration
69
3.1 SNTP configuration
The Simple Network Time Protocol (SNTP) enables you to synchronize the
system time in your network.
The device supports the SNTP client and the SNTP server function.
The SNTP server makes the UTC (Universal Time Coordinated) available.
UTC is the time relating to the coordinated world time measurement. The
time displayed is the same worldwide. Local time differences are not taken
into account.
The SNTP client obtains the UTC from the SNTP server.
Note: For the most accurate system time distribution possible, only use
network components (routers, switches, hubs) which support SNTP in the
signal path between the SNTP server and the SNTP client.
Parameter Meaning Possible Values Default Setting
Function Switches the SNTP function on and
off globally.
On, Off Off
Table 9: Switches SNTP on and off globally
Parameter Meaning Possible Values Default Setting
SNTP Status Displays conditions such as “Server
cannot be reached”.
--
Table 10: SNTP Status
To Next Page
Loading...
Need help?
General
