Hirschmann MACH 4000 - Lease Table

Advanced
228
8.2 DHCP Server
RM Web
Release 6.0 07/2010
8.2.3 Lease Table
The lease table shows you the IP addresses that the DHCP server has
currently allocated.
The device displays the related details for every IP address allocated.
–
a
A client, remote or circuit ID consists of 1 - 255 bytes in hexadecimal
form (00 - ff), separated by spaces.
Parameter Meaning Value range
Port Module and port numbers to which this
entry applies.
-
IP address IP address that the DHCP server has
allocated to the device with the specified
MAC address.
An IPv4 address from the
pool.
Status Status of the DHCP address allocation
according to the Dynamic Host
Configuration Protocol.
bootp, offering,
requesting, bound,
renewing, rebinding,
declined, released
Remaining lease
time [s]
Time remaining in seconds until the
validity of the IP address elapses, unless
the client applies for an extension.
-
Leased MAC
Address
MAC address of the client that is currently
leasing the IP address.
Format xx:xx:xx:xx:xx
Gateway IP address of the DHCP relay via which
the client has made the request.
IPv4 address or empty
Local (client) ID The client ID that the client submitted for
the DHCP request.
a
Remote ID The remote ID that the client submitted for
the DHCP request.
a
Circuit ID The circuit ID that the client submitted for
the DHCP request.
a
Table 103: DHCP lease table