Advanced
222
8.2
DHCP Server
RM Web
Release
6.0
07/2010
8.2 DHCP Server
The DHCP Server dialogs allow you to very easily include new devices
(clients) in your network or exchange them in your network: When you select
DHCP as the configuration mode for the client, the client gets the
configuration data from the DHCP server.
The DHCP server assigns to the client:
– a fixed IP address (static) or an address from an address range
(dynamic),
– the netmask,
– the gateway address,
– the DNS server address,
– the WINS server address and
– the lease time.
You can also specify globally or for each port a URL for transferring additional
configuration parameters to the client.
8.2.1 Global
This dialog allows you to switch the DHCP server of the device on and off
globally and for each port.
To Next Page
Loading...
Need help?
General
