Routing
RM Web L3E
Release
6.0
07/2010
6.2
Configuring Router Interfaces
135
6.2 Configuring Router
Interfaces
With these dialogs you can:
X Configure port-based and VLAN-based router interfaces.
X Assign a number of IP addresses for each router interface (multinetting).
6.2.1 Configuration
This dialog allows you to configure the router interfaces. You can:
X Assign an IP address/netmask to a router interface. Enter additional
addresses for a router interface in the “Secondary addresses” dialog
(multinetting).
X Set up a VLAN-based router interface.
X Switch on/off the routing function for each routing interface.
X Switch on/off the proxy ARP function for each routing interface.
X Switch on/off the Netdirected Broadcasts function for each routing
interface.
To Next Page
Loading...
Need help?
General
