Routing
134
6.1
Routing Global
RM Web
Release
6.0
07/2010
6.1 Routing Global
With this dialog you can:
X switch on the routing function globally.
X display the default TTL (Time To Live).
TTL is a value in an IP data packet. Every router that passes on a data
packet reduces this value by 1. The router that receives a data packet with
the TTL value 1 rejects the data packet and reports it to the sender, whose
IP source address is contained in the IP packet.
If the Switch sends its own data packet, then it sets the TTL value to the
default value displayed.
Note: When you activate routing, the device automatically activates the
learning of MAC source addresses. If routing is active, the device prevents
the address learning from being switched off.
To Next Page
Loading...
Need help?
General
