Routing
144
6.4
Router Discovery Configuration
RM Web
Release
6.0
07/2010
6.4 Router Discovery
Configuration
ICMP Router Discovery is a procedure for locating possible routers in the
network for data transmission. The Switch supports this procedure by
transferring presence messages when the function is active.
Parameter Meaning Value range Default setting
Module Router module Device
dependent
–
Port Port of the module Device
dependent
–
VLAN ID VLAN membership of the port Device
dependent
Advertise Mode Activate/deactivate the router
discovery function at this port
on/off off
Advertise
Address
Destination for sending the presence
messages.
Multicast/
Broadcast
Multicast
Table 54: Router discovery configuration
To Next Page
Loading...
