Routing
RM Web L3E
Release
6.0
07/2010
6.6
Routing table
153
Source Meaning Default setting
connected Entry for routes/interfaces connected directly to the router. 0
static Entry for routes from the static routing table. 1
ospf-intra Entry for routes from the Open Shortest Path First (OSPF)
protocol within an area
8
ospf-inter Entry for routes from OSPF between areas 10
ospf-ext-t1 These routes were imported from an Autonomous System
Boundary Router (ASBR) into the OSPF area. These routes use
the costs relating to the connection between the ASBR and this
Switch as part of the route costs.
13
ospf-ext-t2 These routes were imported from an Autonomous System
Boundary Router (ASBR) into the OSPF area. These routes do
not use the costs relating to the connection between the ASBR
and this Switch as part of the route costs.
150
rip Entry for routes from the Routing Information Protocol. 15
Table 61: Preference lists
To Next Page
Loading...
