Redundancy
162
7.2
Ring Redundancy
RM Web
Release
6.0
07/2010
X Delete the Ring Redundancy.
Note: Enabled Ring Redundancy methods on a device are mutually
exclusive at any one time. When changing to another Ring Redundancy
method, deactivate the function for the time being.
Parameter Meaning
Version Select the Ring Redundancy version you want to use:
HIPER-Ring
MRP
Default setting is HIPER-Ring
Ring port No. In a ring, every device has 2 neighbors. Define 2 ports as ring ports to which the
neighboring devices are connected.
Module Module identifier of the ports used as ring ports
Port Port identifier of the ports used as ring ports
Operation Value depends on the Ring Redundancy version used. Described in the
following sections for the corresponding Ring Redundancy version.
Table 67: Ring Redundancy basic configuration
To Next Page
Loading...
