Redundancy
212
7.6
VRRP/HiVRRP
RM Web
Release
6.0
07/2010
Note: As the IP address owner has the fixed VRRP priority 255 by
definition, the VRRP tracking function requires the IP addresses of the
VRRP router interfaces to differ from the virtual router IP address.
Note: Activate the preempt mode so that, the backup router can take over
the master role after the decrementation of the master’s VRRP priority via
the tracking function.
Click “Finished” to transfer the VRRP router interface to the VRRP
router interface table
or
Click “Continue” if you want to enter additional IP addresses under
“Associated IP Addresses” (Multinetting).
Click “Finished” to transfer the VRRP router interface to the VRRP
router interface table.
Configuring the VRRP router instance
In the Redundancy:VRRP/HiVRRP:Configuration dialog,
double-click a cell of the table and edit the entry or
right-click a cell and select a value.
As an alternative to editing directly in the table, you can mark a row in
the table and use the Wizard to edit it.
Deleting a VRRP router instance
In the Redundancy:VRRP/HiVRRP:Configuration dialog, select
a row and click “Delete”. You thus delete the row.
To Next Page
Loading...
Need help?
General
