10. Enter the Number corresponding to the replaced CNA mezzanine card in
Select No. line, and then press Enter.
11. Remove the check in Mapped check box in Client View pane of Virtual
Media Session window. Keep the Virtual Media Session window still
open.
12. Remove the CB500 CBTP CD-ROM from the console PC, and then insert
CNA FW Update Media CD-ROM.
13. Click the Mapped check box in Client View pane of Virtual Media
Session window. Keep the Virtual Media Session window still open.
7-76
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
