Hitachi Compute Blade 500 Series - Page 101

Menu items
Selection
1
Description
MOR Status - Displays MOR (memory overwrite request)
status.
Refresh TPM Status - Refreshes the display of TPM status.
TPM Settings
TPM Device • <<Disable>>
• Enable
Enables or disables TPM Device.
TPM State •
<<Deactivate>>
• Activate
Performs TPM Activation.
This item is only displayed when TPM
Device is Enable.
TXT State • <<Disable>>
• Enable
Enables or disables TXT.
MOR State • <<Disable>>
• Enable
Enables or disables Memory Overwrite
Request (MOR).
TPM Force Clear - Deletes the TPM data.
Note:
1. A value in double angle brackets, << >>, shows the default.
TPM device settings
Enable the status of Trusted Platform Module (TPM) device.
Use the following procedure for enabling the TPM Device.
1. Confirm that "TPM Physical Presence" value is <Asserted> in the System
Security sub menu.
2. Select <Disable> of "TPM Device", and press Enter. <Enable> is
displayed, and press Enter again.
3
. "Operation success, require reboot to take effect." is displayed.
4. "TPM State" menu is added in the System Security sub menu when "TPM
Device" value is <Enable>.
5. Select <Deactivate> of "TPM State", and press Enter. <Enable> is
displayed, and press Enter again.
6. "Operation success, require reboot to take effect." is displayed.
TPM is activated after rebooting the server blade.
RAS Configuration sub menu
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select the item to display or set, and press Enter.
UEFI setup menu
2-81
Hitachi Compute Blade 500 Series EFI User's Guide