Hitachi Compute Blade 500 Series - Drive Management: Physical Drive Management Menu

2. Virtual Drive Management menu appears.
The following table shows description of items in the window.
Table 6-4 Virtual drive management menu items
Menu items Description Reference
Create Configuration Creates virtual drives.
Virtual drive configuration on
page 6-16
Manage Virtual
Drive Properties
Displays virtual drive status
and setting information.
Manage Virtual Drive
Properties: virtual drive
information view on page 6-9
Select Virtual Drive
Operations
Executes a task on the
virtual drive.
Consistency check on virtual
drives on page 6-42
View Drive Group
Properties
Displays virtual drive
properties information.
-
Note:
• View Drive Group Properties is not supported. Do not use this item.
• Manage Virtual Drive Properties and Select Virtual Drive Operation
are available when a configured virtual drive exists
Drive Management: physical drive management menu
On this window, you can show physical drive information and execute tasks.
1. Select Drive Management from Configuration Options window, and
press Enter.
2. Drive Management menu appears.
The following table shows description of items in the window.
Table 6-5 Drive management menu items
Menu items Description Reference
View Drive Properties Displays physical drive status
and setting information.
View Drive Properties:
physical drive information
view on page 6-12
Select Drive Operations Executes a task on the physical
drive.
Rebuilding virtual drives on
page 6-43
View Global Hot Spare
Drives
Displays hotspare for the
physical drive.
-
Note: View Global Hot Spare Drives cannot be selected.
LSI Software RAID Configuration Utility for disk arrays
6-7
Hitachi Compute Blade 500 Series EFI User's Guide