Hitachi Compute Blade 500 Series - iSCSI Target settings

4. When following text is displayed, press Y.
5. Press ESC to go back to the Controller Configuration setting menu.
iSCSI Target settings
Boot device setting
1
. Select iSCSI Target Configuration in the Controller Configuration setting
menu and press Enter.
2. When the iSCSI Target Configuration setting menu is displayed, select
Add New iSCSI Target and press Enter.
3. When the Add/Ping iSCSI Target setting menu is displayed, enter
iSCSI Target IP Address of iSCSI Target device to be connected. After
that, select Save/Login and press Enter
.
iSCSI settings
9-9
Hitachi Compute Blade 500 Series EFI User's Guide