Hitachi Compute Blade 500 Series - Canceling Procedure of Fcoe Boot Setting (Fcoe BIOS)

Canceling procedure of FCoE boot setting (FCoE BIOS)
This section describes the canceling procedure of FCoE boot setting.
1. In the window of the procedure step 11 in Setting for FCoE boot (FCoE
BIOS), select the boot device, and press Enter.
2. Select Clear selected boot entry!!, and press Enter.
Fibre channel over Ethernet (FCoE)
10-9
Hitachi Compute Blade 500 Series EFI User's Guide