Save Settings
Select Save Settings and press Enter to save the new settings.
Restore Settings
Select Restore Settings
and press Enter
to cancel the change in settings
and to restore to the previous settings.
Load Default Settings
Select Load Default Settings and press Enter to cancel the change in
settings and to restore to the factory default settings.
Exit Setup
Select Exit Setup and press Enter to exit from the setup menu.
When the dialog to select either you want to exit setup menu or return to
setup utility appeared, press Y to exit the setup menu.
Tip: If you have unsaved changes, <Y> Save And Exit the Setup Utility is
appeared. And then press Y
to save changed settings and exit.
UEFI setup menu items (CB 520X B1)
This section describes UEFI setup menu items for CB 520X B1.
System Configuration and Boot Management
Select an item to display or set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Table 2-77 System Configuration and Boot Management menu items
Menu items Description
System Information Displays the basic system information, which cannot be changed.
System Settings Displays the system settings.
Data and Time Displays the local date and time of the system.
UEFI setup menu
2-89
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
