Hitachi Compute Blade 500 Series - Rebuilding Virtual Drives

9. Hot spare is unassigned from the physical drive.
Rebuilding virtual drives
You need to rebuild virtual drives using RAID utility, Server installation and
monitoring tool - internal storage monitor referring to Server installation and
monitoring tool User's Guide - internal storage monitoring functions contained
in the flash memory embedded.
See the Hitachi Compute Blade Series Hitachi Compute Rack Series OS
Installation Guide for Windows Server
or
Hitachi Compute Blade 500 Series
OS Installation Guide for Red Hat Enterprise Linux in the flash memory
embedded in the server chassis for where it is.
Note: Rebuilding can be executed with RAID 1 that has redundancy.
Tip:
• When hot spare is set, virtual drives will be automatically rebuilt if a
physical drive fails.
•
When hot spare is not set, replace the failed physical drive with a proper
one to start rebuilding automatically.
• Only when automatic rebuilding does not start for some reason, rebuild
virtual drives manually.
SAS 3004 iMR ROMB Configuration Utility
5-45
Hitachi Compute Blade 500 Series EFI User's Guide