Hitachi Compute Blade 500 Series - UEFI Setup Menu Items (CB 540 A A1;B1); System Configuration and Boot Management

7. Disable is shown for SCU Controller.
8. Press Esc repeatedly until the following message is shown.
9. Type Y key to end the UEFI setup menu.
UEFI setup menu items (CB 540A A1/B1)
This section describes UEFI setup menu items for CB 540A A1/B1.
System Configuration and Boot Management
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
2-74
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide