Disk with foreign configuration
This section describes how to deal with a disk with a different configuration
detected by the disk array controller board configuration.
Difference in configuration between disks may be caused by the following
conditions.
Table 3-19 Conditions to generate foreign configuration
Conditions to generate foreign configuration
A disk failed and could not be recognized. Then the disk has been restored to be
recognized.
A disk, used in another device with a specific disk array configuration, is used in the
array.
1. Click Preview.
3-56
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
