Hitachi Compute Blade 500 Series - Disconnecting Iscsi Target; Disconnecting Boot Device

Tip: When adding iSCSI Target, select Add New iSCSI Target and
follow the step 2 and after.
8. Confirm that iSCSI Target Name and iSCSI Target IP Address is
displayed in the following setting menu. After that, press Enter.
9. Following setting menu is displayed by pressing Esc several times. After
that, select Save and press Enter
.
10. Press Esc and following is displayed. Press Y to reboot a server blade.
Disconnecting iSCSI Target
Disconnecting boot device
Note: Connection or disconnection of iSCSI Target device can be also set by
One CommandManager.(For details, see the Hitachi Compute Blade 500
OneCommandManager Guide.)
9-14
iSCSI settings
Hitachi Compute Blade 500 Series EFI User's Guide