Hitachi Compute Blade 500 Series - Page 489

4. When following is displayed, press Y.
Tip: Error message Login to portal xxx.xxx.xxx.xxx:xxx failed. is
displayed when iSCSI Target IP Address
does not exist or when target
device is not connected correctly. Resetting of iSCSI Target device is
required.
5. Press F3 at following setting menu and change Add Target
to Yes.
6. Confirm that Add Target is Yes. After that, select Add Selected iSCSI
Targets and press Enter.
7. Confirm that Connection Status is Connected. After that, select connected
iSCSI Target and press Enter.
iSCSI settings
9-13
Hitachi Compute Blade 500 Series EFI User's Guide