Hitachi Compute Blade 500 Series - Starting PXESelect Utility

iSCSI settings flow chart
Figure 9-1 UEFI setup menu
Tip: See Disconnecting iSCSI Target on page 9-14, for details when
disconnecting iSCSI Target.
Personality settings
Starts LOM(ServerEngines BladeEngine3) and PXESelect Utility in Emulex PXE
BIOS on 10Gb 4-port converged network mezzanine card and set Personality
to iSCSI.
Starting PXESelect Utility
Follow the procedure to start PXESelect Utility.
9-2
iSCSI settings
Hitachi Compute Blade 500 Series EFI User's Guide