Hitachi Compute Blade 500 Series - UEFI Setup Menu Items (CB 520 A A1); System Configuration and Boot Management

Tip: If you have unsaved changes, <Y> Save And Exit the Setup Utility is
appeared. And then press Y
to save changed settings and exit.
UEFI setup menu items (CB 520A A1)
This section describes UEFI setup menu items for CB 520A A1.
System Configuration and Boot Management
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Table 2-49 System Configuration and Boot mManagement menu items
Menu items Description
System Information Displays the basic system information, which cannot be changed.
System Settings Displays the system settings.
Data and Time Sets the local date and time of the system.
Start Options Executes boot from a device selected on Boot Option, Primary
Boot Sequence, Boot Manager.
Boot Manager Displays the boot priority order; adds, deletes a boot device;
changes the boot order; sets boot from a file, one-time boot; or
resets the system.
System Event Logs Displays the system event logs display menu.
User Security Sets/changes power-on and administrative passwords.
Save Settings Saves the new settings.
Restore Settings Discards any changes you made and restore to the original
settings.
Load Default Settings Returns settings to the default values.
Exit Setup Exits the Setup menu.
System Information
Select an item to display or set, and press Enter.
UEFI setup menu
2-57
Hitachi Compute Blade 500 Series EFI User's Guide