Hitachi Compute Blade 500 Series - Referenced Documents; Document Conventions

Chapter Description
Corp Config Utility" is described as "SAS
Configuration Utility" in this manual.
Chapter 8, BIOS settings for PXE
boot
Describes BIOS settings for PXE boot.
Chapter 9, iSCSI settings Describes iSCSI settings.
Chapter 10, Fibre channel over
Ethernet (FCoE)
Describes fibre channel over Ethernet, hereinafter
referred to as FCoE.
Referenced Documents
• MegaRAID Storage Manager Version 8.31-01 Instruction Manual,
MK-99COM085
•
MegaRAID Storage Manager Version 11.08.03-02 Instruction Manual,
MK-99COM030
These two documents above are described as MegaRAID Storage Manager
Version xxx Instruction Manual in the body of this document.
• Hitachi Compute Blade Series Hitachi Compute Rack Series OS
Installation Guide for Windows Server, MK-99COM076
• Hitachi Compute Blade 500 Series OS Installation Guide for Red Hat
Enterprise Linux, MK-99COM141
• Hitachi Compute Blade 500 OneCommandManager Guide,
MK-91CB500031
• Server installation and monitoring tool User's Guide - internal storage
monitoring functions
• Hitachi Gigabit Fibre Channel Adapter USER'S GUIDE (BIOS/EFI Edition),
MK-99COM009
• Hitachi Compute Blade Emulex Adapter User's Guide for Hardware,
MK-99COM104
Document Conventions
This term "Compute Blade" refers to all the models of the Compute Blade,
unless otherwise noted.
The Hitachi Virtualization Manager (HVM) name has been changed to Hitachi
logical partitioning manager (LPAR manager, or LP). If you are using HVM
based logical partitioning feature, substitute references to Hitachi logical
partitioning manager (LPAR manager, or LP) with HVM.
This document uses the following typographic conventions:
Convention Description
Regular text bold In text: keyboard key, parameter name, property name,
hardware labels, hardware button, hardware switch.
Preface
xi
Hitachi Compute Blade 500 Series EFI User's Guide