Table 6-2 Configuration options menu items
Menu items Description Reference
Controller
Management
• Displays the disk array controller
information.
•
Sets the disk array controller.
•
Deletes virtual drives.
Controller Management:
disk array controller
management menu on page
6-6
Virtual Drive
Management
• Configures logical drives.
• Sets virtual drives.
•
Executes tasks of virtual drives.
• Displays virtual drive information.
Virtual Drive Management:
virtual drive management
menu on page 6-6
Drive
Management
• Display physical drive information.
• Executes tasks of physical drives.
•
Displays hotspare configuration
information.
Drive Management: physical
drive management menu on
page 6-7
Controller Management: disk array controller management menu
On this window, you can show and configure hardware information about a
disk array controller, and remove all virtual drives configured.
1. Select Controller Management from Configuration Options window, and
press Enter.
2. Controller Management menu appears.
The following table shows description of items in the window.
Table 6-3 Controller management menu items
Menu items Description Reference
View Controller
Information
Displays the disk array
controller information.
View Controller Information: disk
array controller information view on
page 6-8
Change Controller
Properties
Sets disk array controller
properties.
Change Controller Properties: disk
array controller settings on page
6-9
Clear Configuration Deletes all virtual drives
under the disk array
controller.
To delete all virtual drives on page
6-38
Virtual Drive Management: virtual drive management menu
On this window, you can create virtual drives, show the information, and
execute tasks.
1. Select Virtual Drive Management from Configuration Options window, and
press Enter.
6-6
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
