Hitachi Compute Blade 500 Series - Personality Setting

1. Start the remote console, and then click Power > Power On to power on
a server blade.
2
. When Press <Ctrl> <P> for PXESelect(TM) Utility is displayed in the
bottom of the window, press Ctrl + P.
3. PXESelect Utility starts.
Personality setting
Follow the procedure to set Personality to iSCSI.
1. Select controller name using ↑ and ↓ on PXESelect Utility window, then
press Enter in the PXESelect Utility window.
iSCSI settings
9-3
Hitachi Compute Blade 500 Series EFI User's Guide