BIOS settings: enabled or disabled
This section describes the procedure for changing the BIOS setting of the SAS
RAID controller: MegaRAID SAS 2208.
When using the boot from an external storage to the system unit with the
SAS RAID controller: MegaRAID SAS 2208, change the BIOS setting:
Controller BIOS setting to Disabled
Tip: When the BIOS setting: Controller BIOS setting is changed to Disabled,
you cannot execute the boot from the disk array configured in the SAS RAID
Controller: MegaRAID SAS 2208.
1. Click Controller Properties in the main menu.
2. Click Next.
MegaRAID WebBIOS for storage expansion blades
4-83
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
