Note: Unless otherwise specified, use the recommended values for all setting
items. If you set non-recommended values, the equipment would not be
supported and might not operate properly.
Main menu
Start MegaRAID WebBIOS, and the following main menu is displayed.
Click the target item that you want to set or display.
The following table shows description of menu items in the left side of
window.
Table 3-4 Main menu items
Menu items Description
Advanced Software Options Sets expansion functions.
Controller Selection
1
Returns to the Controller Selection window.
Controller Properties Displays and sets the hardware information on the disk
array controller board.
Scan Devices Scans the installed devices.
Virtual Drives Displays and sets the disk array (logical drive) information.
Drives Displays and sets the disk (physical drive) information.
Configuration Wizard Configures or formats disk arrays.
Physical View Switches display modes.
Events Displays events.
MegaRAID WebBIOS for LSI SAS 2008
3-9
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
