Hitachi Compute Blade 500 Series - Page 105

Note:
• If you delete boot options in a poor attempt, trouble may occur such as
boot failure.
• Legacy Only
is a flag to indicate booting from target devices displayed
below in Legacy mode, not to indicate target devices to boot. For CB 540A
A1/B1, we guarantee OS boot only in Legacy mode. Thus, do not delete
Legacy Only.
Tip: You can delete WOL Boot Option in Delete WOL Boot Option menu in
the same way.
Change Boot Order sub menu
Select an item to display or set, and press Enter.
UEFI setup menu
2-85
Hitachi Compute Blade 500 Series EFI User's Guide