2. When the following window is displayed, confirm that the underlined disk
array controller is "MegaRAID SAS MR9240-8i", and then press Ctrl +
H
keys.
When the OS has started before pressing the key, shut down the OS and
restart the server blade. See the documents attached to your OS for
shutting down.
Tip: When the storage expansion blade has multiple disk array
controllers, the following window is displayed.
When press Ctrl +
H keys in the above window that the underlined disk
array controller is "MegaRAID SAS 9240-8i", MegaRAID WebBIOS that
correspond to the storage expansion blade is started.
If you start MegaRAID WebBIOS incorrectly, exit MegaRAID WebBIOS,
and then restart the system unit.
3. The MegaRAID WebBIOS is started and Adapter Selection is displayed.
MegaRAID WebBIOS for LSI SAS 2008
3-5
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
