Hitachi Compute Blade 500 Series - Page 161

Menu items Description
HostInterface Host interface
Firmware Version Firmware version
FW Package Version Firmware package version
Firmware Time Current time that firmware recognizes
WebBIOS Version MegaRAID WebBIOS version
Drive Count Number of installed physical devices
Unconfig Good SpinDown SpinDown setting mode for unused disks
FRU Board names for maintenance
Drive Security Capable Physical drive security capability: Yes or No
PortCount Number of installed ports
NVRAM Size Size of installed NVRAM
Memory Size Size of installed memory
Min Strip Size Minimum strip size
Max Strip Size Maximum strip size
Virtual Drive Count Existing number of array configurations (logical devices)
Hot Spare Spin Down Disk spin-down mode set to HotSpare.
Drive Standby Time Processing time required before Drive Standby starts
Tip: You cannot change the settings for those items displayed above.
Controller properties submenu 1
Click Next in the Controller Information
window. The following Controller
Properties window is displayed.
If you want to change the setting, select or input the value from the pulldown
menu.
If you want to indicate another controller property, click Next.
MegaRAID WebBIOS for LSI SAS 2008
3-11
Hitachi Compute Blade 500 Series EFI User's Guide