4. Wait until the processing is completed to 100%.
A guideline of rebuilding time is shown in the following table.
Table 3-17 Guideline of rebuilding time
RAID level Capacity of a disk array Rebuilding time
RAID 1 300GB (SAS: 300GB HDD x 2) Approximately 70 minutes
Tip: The rebuilding time is proportional to the capacity of a disk array.
5. When rebuilding is completed to 100%, click Home.
MegaRAID WebBIOS for LSI SAS 2008
3-49
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
