This section describes how to change BIOS settings of a SAS RAID board.
Tip:
• When changing the BIOS setting in the item of Controller BIOS to
Disabled, you cannot boot form the disk array built with the SAS RAID
board.
•
When N+M cold standby function is used, disk array is not supported in
the server blade.
1. Click Controller Properties in the main menu.
2. Click Next.
MegaRAID WebBIOS for LSI SAS 2008
3-51
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
