2. When the following window appears, press Ctrl + H keys after you
confirm LSI MegaRAID SAS 9266-8i as the disk array controller name
within a red frame in the following window. The MegaRAID WebBIOS is
started.
If the operating system starts before you press those keys, shutdown the
operating system and then restart the system unit. Consult the manual
for ending your operating system because some operating systems, such
as Windows, require shutdown or other special operations.
Tip: When multiple LSI SAS 2008 RAID mezzanine cards are mounted,
the following window is displayed.
MegaRAID WebBIOS for storage expansion blades
4-5
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
