Hitachi Compute Blade 500 Series - Page 239

Note: If you select New Configuration, all data in the disks is lost.
Backup your required data before selecting New Configuration.
Tip:
•
When you click Add Configuration
, the existing drive groups and disk
arrays still remain. This should be selected when you add a disk array to
the existing disk group or build a disk array using additional hard disks.
• When you click New Configuration, you lose the existing drive group
and disk arrays. This should be selected when you discard the existing
drive group and disk arrays to build a new one.
• When you click New Configuration, the following window is displayed
first. Click Yes to build a new disk array.
3. Click Manual Configuration and click Next.
MegaRAID WebBIOS for storage expansion blades
4-29
Hitachi Compute Blade 500 Series EFI User's Guide