Hitachi Compute Blade 500 Series - Page 271

Checking disk arrays for consistency
This section describes how to check the consistency of disk arrays.
Consistency check can be done from MegaRAID Storage Manager. See the
MegaRAID Storage Manager Version xxx Instruction Manual in the DriverKit
CD-ROM for how to check the consistency from the MegaRAID Storage
Manager.
Tip: Consistency check on disk arrays can be executed only for RAID 1, 5, 6,
10.
1. Click Virtual Drives in the main menu.
MegaRAID WebBIOS for storage expansion blades
4-61
Hitachi Compute Blade 500 Series EFI User's Guide