Table 4-21 Setting value
Setting value Description
Enabled Enables BIOS of the SAS RAID controller: MegaRAID SAS 2208.
Enables the boot from the disk array.
Disabled Disables BIOS of the SAS RAID controller: MegaRAID SAS 2208.
Disables the boot from the disk array.
Tip: Be sure to click Submit after setting the item.
6. Confirm that Controller BIOS is set to that value, and click Home.
7. The window returns to the main menu.
4-86
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
