Boot Manager
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-12 Boot Manager menu items
Menu items Description
Primary Boot Sequence
Add Boot Option Adds a device or file system to the boot option.
See
Add Boot Option sub menu on page 2-14.
Delete Boot Option Deletes a device or file system from the boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page 2-14.
Change Boot Order Changes boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page 2-15.
Secondary (WOL) Boot Sequence
Add WOL Boot
Option
Adds a device or file system to the WOL boot option.
See Add Boot Option sub menu on page 2-14.
Delete WOL Boot
Option
Deletes a device or file system from the WOL boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page 2-14.
Change WOL Boot
Order
Change the WOL boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page 2-15.
Boot Other
Boot From File Boots up from a file that you specify.
Boot From Device Boots up from a device that you specify. See Boot From Device
sub menu on page 2-16 for details.
UEFI Shell Boots UEFI Shell.
Select Next One-
Time Boot
Tries to boot from a specific target only on the next boot.
System
Boot Modes Displays a window to change boot modes.
See Boot Modes sub menu on page 2-17 for details.
Reset System Restart the system.
Tip: If the OS image cannot be found through the boot device or PXE server,
the server blade may reboot again and again.
Confirm the connection of boot device or PXE server in this case.
UEFI setup menu
2-13
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
