The following table shows an estimate time for Rebuild.
Physical drive capacity Time required for Rebuild
SATA HDD 500GB 170 hours
SATA HDD 1TB 340 hours
To stop Rebuild:
When stopping Rebuild with LSI Software RAID Configuration Utility, follow
the steps shown below.
1. Execute step 1, step 4, and step 5 shown in Rebuilding virtual drives on
page 6-43 to show Select Drive Operations window. Then, select Select
Drive and press Enter.
6-48
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
