Hitachi Compute Blade 500 Series - Page 473

3. Select Boot Manager, and then press Enter.
4. Select Add Boot Option or Add WOL Boot Option on Boot Manager
window, and then press Enter
.
5. Select Generic Boot Option on Add Boot Option window, and then press
Enter.
6. Select PXE Network on Generic Boot Option window, and then press
Enter. PXE Network is deleted from the list.
Note: It may take one or two minutes to delete PXE Network from the
list.
Do not perform another operation until deleting PXE Network from the
list.
7. Press ESC to go back the Boot Manager window.
8
. Select Change Boot Order or Change WOL Boot Order on Boot
Manager window, and then press Enter.
9. Select Change the Order on Change Boot Order window, and then press
Enter.
10. Select PXE Network, and select a item that is one line below Legacy
Only, and then press Enter.
BIOS settings for PXE boot
8-5
Hitachi Compute Blade 500 Series EFI User's Guide