Hitachi Compute Blade 500 Series - Page 48

Menu items
Selection
1
Description
Console Redirection
Settings
- Sets console redirection and COM
port.
Note:
1. A value in double angle brackets, << >>, shows the default.
System Security sub menu
Select an item to display or set on Trusted Platform Module (TPM 1.2), and
press Enter.
Tip:
• Configure the following items when using TXT function.
– TPM Device: Enable
– TPM State: Activate
– TXT State: Enable
•
When using TXT function on Vmware, execute the following command at
boot.
• #bootOption -o
The following table shows description of menu items appeared in the left side
of the window.
Select the item to display or set, and press Enter.
Table 2-24 System Security sub menu items
Menu items
Selection
1
Description
TPM Status
TPM Physical Presence - Displays the status of TPM Physical Presence.
TPM Device State - Displays TPM Device State.
TPM TXT Status - Displays TPM Trusted Execution Technology
(TXT) Status.
MOR Status - Displays MOR (memory overwrite request)
status.
Refresh TPM Status - Refreshes the display of TPM status.
TPM Settings
TPM Device • Disable
• <<Enable>>
Enables or disables TPM Device.
TPM State •
Deactivate
• <<Activate>>
Performs TPM Activation.
This item is only displayed when TPM Device
is Enable.
TXT State • <<Disable>> Enables or disables TXT.
2-28
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide