Hitachi Compute Blade 500 Series - Page 54

Tip: You can change WOL Boot Order in Change WOL Boot Order menu in
the same way.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-29 Change Boot Order menu items
Menu items Description
Change the
order
Displays bootable devices currently available in the boot attempt
order. To change orders, select and highlight a device with up/down
cursor keys, change the order with [+]/[-] keys, and press Enter.
Commit Changes Commits changes. You need to save the new settings before exiting
from the setup menu
Note: Legacy Only is a flag to indicate booting from target devices
displayed below in Legacy mode, not to indicate target devices to boot. For
CB 520H B2, we guarantee OS boot only in Legacy mode. Thus, place Legacy
Only at the top of the Boot Order.
Boot From Device sub menu
Select a device to boot, and press Enter.
Check Legacy Only to start booting in Legacy mode from the selected
device.
2-34
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide