Menu items
Selection
1
Description
Memories can be disabled/Enabled per
memory controller.
See Memory Deconfigure Mode Details
on page 2-46.
Notes:
1. A value in double angle brackets, << >>, shows the default.
2. When Mirroring is enabled, you cannot set Sparing. Conversely, when Sparing is
enabled, you cannot set Mirroring.
System Memory Details
Place the cursor on a processor to display, and press Enter.
Tip: Currently installed processors are displayed on the window.
Select a processor to show the details of memory connected to the processor.
UEFI setup menu
2-45
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
