Boot Manager
Select an item to display or set, and press Enter.
Note: Do not change the settings of the following item. If you change the
settings in a poor attempt, UEFI may not start up.
• Boot From File
• Boot From Device
• UEFI Shell
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Table 2-46 Boot Manager menu items
Menu items Description
Primary Boot Sequence
Add Boot Option Adds a device or file system to the boot option.
See Add Boot Option sub menu on page 2-53.
Delete Boot Option Deletes a device or file system from the boot option, which is
enabled in the next boot.
See Delete Boot Option sub menu on page 2-53.
Change Boot Order Changes boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page 2-54.
Secondary (WOL) Boot Sequence
Add WOL Boot
Option
Adds a device or file system to the WOL boot option.
See Add Boot Option sub menu on page 2-53.
Delete WOL Boot
Option
Deletes a device or file system from the WOL boot option, which
is enabled in the next boot.
See Delete Boot Option sub menu on page 2-53.
Change WOL Boot
Order
Change the WOL boot orders, which are enabled in the next boot.
See Change Boot Order sub menu on page 2-54.
Boot Other
Boot From File Boots up from a specific device or file.
Boot From Device Boots up from a specific device path.
Select Next One-
Time Boot
Tries to boot from a specific target only on the next boot.
System
Boot Modes Displays the window to change system boot modes.
Reset System Restart the system.
2-52
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
To Next Page
Loading...
