ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual
6.13
USER INTERFACE
Note:
Be sure to remove the bath’s evaporative cover before placing it into the processor.
Remove Used Baths
- to remove completed fixative baths that are on board the instrument, press the
Remove Used Baths
button. The door locks and a completed bath is moved to the door. The door
unlocks. Remove the bath and close the door. The door will lock and the next bath is delivered to the
door and the door unlocks. Continue in this manner until all baths are unloaded. Press the
Done
button when the last bath is removed.
To Next Page
Loading...
