Honeywell 30 Series User Manual

CHAPTER
86
Honeywell 30 Series IP Cameras User Guide
9 VIEWING SYSTEM INFO
This chapter contains the following sections:
• Log, page 86
• Version, page 87
Log
Go to Setup  Information  Logs.
System Log
System log displays the system events in a chronological order. The system log is stored
in the camera’s buffer area and will be deleted after the camera is rebooted.
Figure 98 System Log
Access Log
Access log displays the access time and IP address of all viewers (including operators
and administrators) in a chronological order. The access log is stored in the camera’s
buffer area and will be deleted after the camera is rebooted.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)